rozważania o CNC

Marzec 28, 2024, 11:42:59
Witamy, Gość. Zaloguj się lub zarejestruj.

Zaloguj się podając nazwę użytkownika, hasło i długość sesji
Strony: [1]   Do dołu
  Drukuj  
Autor Wątek: bezpiecznik elektroniczny  (Przeczytany 13484 razy)
markcomp
Administrator
*****
Offline Offline

Wiadomości: 14874



WWW
« : Styczeń 17, 2010, 10:38:52 »

bezpiecznik elektroniczny



znalazłem w necie
http://www.circuit-projects.com/index2.php?option=com_content&task=view&id=86&pop=1&page=3&Itemid=53
http://electronics-diy.com/electronic_schematic.php?id=591



Cytuj
This is an electronic fuse that protects the load against short circuit. Relays must be choosen with a voltage value equals to the input voltage. Don't omit using the 100uF capacitor with appropriate voltage value with respect to the input voltage. If you can't provide, you can use C106 instead of BRX46. You can adjust the current with using 10K potentiometer. If you will use the fuse with very high currents, lower the 0R6 5W resistor value (ex. 0R47, 0R33, 0R22 or 0R1). Watt value of the resistor should be increased also.

Zapisane

MARKcomp77

http://oferta.forum-cnc.pl/
Sterowniki.Silniki

Strony: [1]   Do góry
  Drukuj  
 
Skocz do:  


Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC
Manuscript design by Bloc Strona wygenerowana w 0.036 sekund z 18 zapytaniami.