rozważania o CNC

Marzec 28, 2024, 11:17:29
Witamy, Gość. Zaloguj się lub zarejestruj.

Zaloguj się podając nazwę użytkownika, hasło i długość sesji
Strony: [1]   Do dołu
  Drukuj  
Autor Wątek: servo750W: Using new speed forward-feedback function  (Przeczytany 8251 razy)
markcomp
Administrator
*****
Offline Offline

Wiadomości: 14872



WWW
« : Maj 07, 2010, 11:41:21 »

servo750W: Using new speed forward-feedback function








Using new speed forward-feedback function

Using new speed forward-feedback function



forward-feedback


Notice Beforehand

  • Please double-check that you did not change any parameters before starting using speed forwardfeedback function.

  • Or, please set default value.

  • Please move the mechanical parts into middle to leave enough space for three circles of motor rotation.



Guidance on how to use speed forward-feedback function


Enter into concealed parameter

1. Press keys in turn on the panel as ‘Inc, Dec, Dec, Inc, Enter’ under bb status to open concealed parameter.

panel








2. Enter Fn008.

  1. It displays "J" on the panel. Then press "mode" key on the panel to start inertia ratio auto reading.
  2. The motor will then rotate forward CW 3 circles and rotate reverse CCW 3 circles.
  3. The inertia will then be automatically written into Pn124.


Set following parameter

  1. Set Pn012 as 1.
  2. Increase Pn120.



Effected.

  • Now the speed forward-feedback function has been engaged. You can then start to adjust Pn013,Pn014,Pn018,Pn120 and so on according to your application requirements of robustness & noise.

  • Please turn to servo parameter adjustment methods for more reference.





Zapisane

MARKcomp77

http://oferta.forum-cnc.pl/
Sterowniki.Silniki

Strony: [1]   Do góry
  Drukuj  
 
Skocz do:  


Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC
Manuscript design by Bloc Strona wygenerowana w 0.055 sekund z 19 zapytaniami.