rozważania o CNC

pozostałe => konfigurowanie pc itp => Wątek zaczęty przez: markcomp Kwietnia 30, 2008, 01:11:00



Tytuł: Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broad
Wiadomość wysłana przez: markcomp Kwietnia 30, 2008, 01:11:00
Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
przyłączenie tunera FlyDVB-T do ubuntu


Tytuł: Odp: Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broad
Wiadomość wysłana przez: markcomp Kwietnia 30, 2008, 01:13:19
sudo dmesg | grep saa
[ 2242.255423] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 2242.255534] saa7133[0]: found at 0000:10:00.0, rev: 209, irq: 19, latency: 0, mmio: 0x58000000
[ 2242.255548] saa7133[0]: subsystem: 5168:3502, board: LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [card=94,autodetected]
[ 2242.255569] saa7133[0]: board init: gpio is 8010000
[ 2242.412658] saa7133[0]: i2c eeprom 00: 68 51 02 35 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 2242.412670] saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 2242.412676] saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 14 ff ff ff ff
[ 2242.412682] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2242.412688] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 22 15 ff ff ff ff
[ 2242.412694] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2242.412700] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2242.412706] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 2242.871501] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[ 2243.453787] saa7133[0]: registered device video1 [v4l2]
[ 2243.453805] saa7133[0]: registered device vbi0
[ 2243.453821] saa7133[0]: registered device radio0
[ 2243.666608] saa7134 ALSA driver for DMA sound loaded
[ 2243.666637] saa7133[0]/alsa: saa7133[0] at 0x58000000 irq 19 registered as card -2
[ 2243.839919] DVB: registering new adapter (saa7133[0])


Tytuł: Odp: Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broad
Wiadomość wysłana przez: markcomp Maja 01, 2008, 09:45:37
10:00.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
        Subsystem: Animation Technologies Inc. LifeView FlyDVB-T Hybrid CardBus
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (21000ns min, 8000ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at 58000000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-


Tytuł: Odp: Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broad
Wiadomość wysłana przez: markcomp Maja 03, 2008, 10:29:52
http://threebit.net/mail-archive/video4linux/msg01558.html

Cytuj
Very strange problems with my Lifeview FlyDVB-T Carbus card

    * From: James <pickoo (at) gmail.com>
    * Date: Fri, 31 Mar 2006 11:33:07 +0000

Hello

I own a Lifeview FlyDVB-T Duo Cardbus TV card and have found a very strange
and confusing problem trying to use it in Linux and could do with some help.

The card has Analog TV, Digital TV and Composite inputs. I'm trying to make
the composite inputs work so I can plug some old games consoles into my PC.
I'm not that bothered about watching actual broadcast TV through the card at
the moment.

From some Googling, I worked out I needed to load the SAA7134 driver with a
card type of 55, and also the saa7134-alsa module for some sound.

Under Kernel 2.6.16 this randomly works. I've used both tvtime and mplayer and
the result is the same. Here's what happens:

I own a Super Nintendo and a Playstation. They both have composite output with
the standard Red/Yellow/White plugs.

If I plug (say) my SNES into the card, stick a game in the slot (Super Mario
World for example) and then launch tvtime all seems to go well. I can pick
the 'composite2' input and then turn on my console.

However, from then on I can only get an image if I unplug the yellow video
lead from the card and then tap it on the middle pole of the card's yellow
connector. Every time I interrupt the video signal this way, I get one still
image. Completely unplugging the video gives me uninterrupted sound until I
reconnect the video when everything stops again.

The really strange part is that if I plug my Playstation in instead it works
fine! Until I load certain games, when it stops working again (or it can get
to a part of a game and the images will stop). To my limited knowledge, it
seems that the consoles aren't sending out the correct signals or are
attempting to change "resolution" to display different things. The card is
set to use PAL, and both consoles are PAL devices that by default give a
standard 50Hz picture. When I do see images they are the correct size, shape
and colour. They're not deformed or appearing half way down the video window.

Naturally, both consoles work fine when connected to a TV, and this convoluted
setup works in Windows.

Has anyone got any ideas why this is happening?

I've attached the output from lspci, the kernel modules loading and a running
instance of mplayer.

My machine is a P4 3.2GHz HT laptop running Gentoo Linux and kernel:

Linux hex 2.6.16-gentoo-r1 #1 SMP PREEMPT Fri Mar 31 01:17:35 GMT 2006 i686
Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz GenuineIntel GNU/Linux

The mplayer commandline I'm using is this:

mplayer tv:// -tv
driver=v4l2:device=/dev/video0:chanlist=europe-west:alsa:adevice=hw.1,0:amode=1:
audiorate=32000:forceaudio:volume=100:immediatemode=0:norm=PAL:input=2

(imagine this is one large line without the linebreaks)

Thanks



Tytuł: Odp: Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broad
Wiadomość wysłana przez: markcomp Maja 03, 2008, 10:33:55
HARDWARE saa7134
http://gentoo-wiki.com/HARDWARE_saa7134

Saa7134 quick guide
http://gentoo-wiki.com/Saa7134_quick_guide

LifeView FlyDVB-T Duo CardBus
http://www.linuxtv.org/v4lwiki/index.php/LifeView_FlyDVB-T_Duo_CardBus


Tv card (saa7134 based) recognized, tvtime doesn't work.
http://www.linuxquestions.org/questions/ubuntu-63/tv-card-saa7134-based-recognized-tvtime-doesnt-work.-638167/

tuner tv ease touch 7131etv jak zainstalować w ubuntu 6.06
http://www.forum.ubuntu.pl/showthread.php?t=39974

http://tvtime.sourceforge.net/

[linux-dvb] FlyDVB-T Duo Cardbus simple patch (for the analog tv)
http://www.linuxtv.org/pipermail/linux-dvb/2005-April/001231.html

Telewizja, radio, magnetowid w Linuksie
http://newbie.linux.pl/?id=article&show=141